swaging

英

美

网络  模锻; 嵌金属型板; 型锻; 擠鍛; 旋锻

机械

双语例句

• The micro-morphology of the fracture surface appears to be the inter-granular brittle before sodium corrosion for the rotary swaging and polishing W-specimens.
  断口分析结果显示，钠腐蚀前，旋锻钨和抛光钨试样的断口形貌均呈现沿晶脆断特征；
• The effects of performance of raw powder, composition, process parameter such as sintering time and temperature, heat-treatments and swaging treatments on relative density and tensile strength for 90W-Ni-Mn alloy were studied.
  主要研究了原料粉末性能、合金成分、烧结温度和保温时间、热处理以及旋锻变形对合金的力学性能影响。
• When swaging vinyl-sheathed wire rope, always retract sheathing to reveal wire rope before proceeding to swage.
  当锻乙烯护套钢丝绳，始终收回护套透露，然后再进行扣压钢丝绳。
• Test on swaging technics of steel cable
  钢索压制锚固工艺的试验
• Finite Element Simulation of Effect of Conical Feeding Angle on Swaging Strain Distribution of Pure Magnesium
  圆锥进料角对纯镁旋锻变形影响规律的热机耦合有限元模拟
• Backward Extrusion Rotary Swaging Forging
  旋转反挤压锻造
• Comparison between rolling-drawing and swaging-drawing
  轧制-拉伸与旋锻-拉伸加工工艺的对比分析研究
• The design method of swaging, sizing, stamping, blanking resetting in high-speed progressive dies has been narrated.
  叙述了压凸包、整形、打麻点、落料复位等模具结构在高速连续级进模中的设计方法。
• Simulation of Connecting Tube's Roller Inner Swaging For Titanium Alloy
  钛合金连接管件内径滚压成形的数值模拟
• The analysis of the fracture and milling surface of swaging tungsten billets and drawing tungsten wire was made by the scanning electronic microscope. These sample were done by traditional process: making powder doped by Liquid-Solid mixing method, pressing, sintering, swaging, drawing etc.
  对传统粉末冶金方法（液&固混合制成掺杂钨粉，经过压制、烧结、旋锻、拉拔等工序）制成的钨坯和钨丝，用扫描电子显微镜进行了断面及磨面分析。